www.samtec.com f-203-1 samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec israel tel: 972 3 648 7207 fax: 972 3 648 7214 samtec scandinavia tel: +46-84477280 fax: +46-87420413 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. double full size (72 positions): (91,71) 3.650 less than 72 positions: no. positions/row x (2,54) .100 + (1,50) .059 single full size (32 positions): (91,69) 3.610 less than 36 positions: no. positions/row x (2,54) .100 + (0,48) .019 (2,54) .100 (0,76) .030 sq (9,27) .365 ref (5,08) .200 (2,54) .100 end assembly row option no. pins per row type strip 02 thru 32 02 thru 36 idm = standard tail male plug ids = socket mates with: tsw, mtsw, tsm, ejh idmd (double) .100" (2,54mm) idc cable idms, idmd, idss & idsd series s d s = single d = double (color coded cable n/a for 31 thru 36 pins/ row. see ? option.) idms (single) idsd (double) idss (single) socket or male plug on each end socket or male plug on one end male plug on one end with socket on other. begin part number with idm. ? = transfer end note: this series is non-standard, non-returnable. (0,48) .019 double full size (64 positions): (82,55) 3.250 less than 64 positions: no. positions/row x (2,54) .100 + (1,68) .066 single full size (32 positions): (81,53) 3.210 less than 32 positions: no. positions/row x (2,54) .100 + (0,71) .028 (0,46) .018 x (0,48) .019 (2,54) .100 (2,54) .100 (2,54) .100 (5,08) .200 (6,10) .240 max (3,18) .125 (for square or long tail see hcmx series) idss, idsd for complete specifications see www.samtec.com?idss or www.samtec.com?idsd insulator material: black glass filled polyester temperature range: -20 c to +105 c (rainbow cable) -40 c to +105 c (gray cable) contact: becu plating: au over 50 " (1,27 m) ni or sn over 100 " (2,54 m) cu or 50 " (1,27 m) ni current rating: 1a contact resistance: 10 m ? max lead size range: (0,56mm) .022" sq to (0,71mm) .028" sq lead insertion depth: (5,59mm) .220" to (6,22mm) .245" insertion force: 4oz avg ((0,64mm) .025" sq probe) withdrawal force: 3oz avg ((0,64mm) .025" sq probe) wire: 28 awg 7/36 stranded tinned copper specifications idms, idmd for complete specifications see www.samtec.com?idms or www.samtec.com?idmd insulator material: black glass filled polyester temperature range: -20 c to +105 c (rainbow cable) -40 c to +105 c (gray cable) terminal: phosphor bronze plating: au over 50 " (1,27 m) ni or sn over 100 " (2,54 m) cu or 50 " (1,27 m) ni current rating: 1a wire: 28 awg 7/36 stranded tinned copper specifications also available flex test links test pcbs that are normally stacked and mated parallel unmate boards and reconnect with test link to expose components on boards signals routed outside row to outside row and inside row to inside row (pin 1 to pin 2, pin 2 to pin 1, etc.) standard 12" length flex circuit mates with tsw/ssw connector sets for specifications see www.samtec.com?htl s = single end d = double end
www.samtec.com samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec israel tel: 972 3 648 7207 fax: 972 3 648 7214 samtec scandinavia tel: +46-84477280 fax: +46-87420413 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. when mating double row connector with two single row connectors, the outer most single will be connected to conductor #1 and the inside single to conductor #2. 1/8" (3,18) 1/4" (6,35) 1/2" (12,70) 3/8" (9,53) ?t8 ?t4 ?t2 ?t3 xx 5"max. 2"min. o = outside reversed option assembled length t c a p xx =polarized r = reversed d xx = daisy chain, double w xx = wiring reversed daisy chain, single st x = stripped & tinned s xx = daisy chain single g = gray cable 1 2 3 specify g for gray cable. gray cable has one red edge. idss uses .100" centerline cable. idsd and idmd uses .050" centerline cable. cable is 28 awg 7/36 copper wire. standard cable is same as above except color coded. specify xx as position. for double the same position will be polarized on both ends. (not available on idm or edm, unless transfer, then only the socket is polarized) standard plating is selective gold over becu contact for ids; selective gold over phosphor bronze for idm. same as s xx except outer strip connected to conductor #2 and inside strip connected to conductor #1. 7 7 7 02 04 01 03 72 71 assembled length in inches ( 1/8 " ) (2 inches minimum) specify suffix from table. all dimensions are 1/16". not available in 28 positions and higher. 4 b xx = breakout specify xx as number of conductors to be broken out. breakout starts with number 1 lead indicated by brown wire or red stripe. shown on top side. 5 rw = reversed wiring #1 wire opposite position #1. 8 m = middle reversed 8 requires sxx, wxx or dxx requires sxx, wxx or dxx 8 6 2 " min. 4 " minimum xx 1 8 " single row connectors (idss) outer most 2 " min. 4 " minimum xx 1 8 " double row connectors (idsd or idmd) outer most polarizing key optional polarizing key for use with idss & idsd series. also polarizes ssw, ssq, esw & esq series. black high temperature thermoplastic order: part number pk-01-06 r = reversed molded-to-position idc assembles low profile skinny side locks dual beam contacts single and double row (6,35mm) .025" square and (5,84mm) .230" length tail available call samtec for hcxx series. also available (5,84) .230 (0,64) .025 sq = tin plating (both ends) = tin idm 10 " (0,25 m) gold ids (-t end assembly required) = 10 " (0,25 m) gold idm tin ids (-t end assembly required) xx.xx = assembled length
|
